Font Strip on BDS
-
Delta2487
- Posts: 8
- Joined: Sat Mar 08, 2025 4:24 pm
Font Strip on BDS
How can I use fonts created in Photoshop? I want to use them primarily for the movie's playback time.
You do not have the required permissions to view the files attached to this post.
-
Alexey Kolesnikov
- Posts: 728
- Joined: Fri Mar 01, 2013 1:03 pm
Re: Font Strip on BDS
If we're talking about timer - you can't do it at the moment.
Theoretically I can add an ability to use pre-rendered fonts for the timer. Will look into it.
Theoretically I can add an ability to use pre-rendered fonts for the timer. Will look into it.
Best regards,
Alexey Kolesnikov
Alexey Kolesnikov
-
rickemail2
- Posts: 86
- Joined: Fri Jun 25, 2021 9:45 pm
Font Strip on BDS
Hi Alexey!Alexey Kolesnikov wrote: Mon Apr 21, 2025 5:35 am If we're talking about timer - you can't do it at the moment.
Theoretically I can add an ability to use pre-rendered fonts for the timer. Will look into it.
I was looking at the "Font Strip on BDS" discussion on the DVDLogic forum, and I would like to suggest a feature for the existing pre-rendered timer system.
I already have original pre-rendered timer characters extracted from commercial Blu-ray menu resources, and I would love to use these graphics directly in BDS instead of generating new characters from an installed font.
For example:
Warner/Deluxe: The timer characters are stored in a separate PNG Font Strip, containing:
"1234567890/:-"
Universal/Pixelogic: The timer characters are also pre-rendered, but they are usually embedded in a larger composite PNG alongside other menu graphics.
My idea is to allow BDS to import either type of PNG and use its original characters to dynamically construct the playback timer.
Ideally, the workflow would be:
1. Import the original Font Strip PNG or composite PNG into BDS.
2. Map each character to its corresponding rectangle in the image, either automatically or manually.
3. Preserve the original glyph dimensions, transparency, baseline and spacing.
4. Let the BDS Java engine dynamically assemble the timer using these imported characters.
5. Continue updating the playback time through the existing "manager.updateTimer()" functionality.
For example, when the playback time is "01:25:43", BDS would select the appropriate pre-rendered digits and separators from the imported PNG and display them in the correct order.
The important distinction is that I don't want BDS to render a font into PNG characters. I want it to use the actual characters that already exist in the imported PNG.
This would make it possible to reproduce the original Warner/Deluxe and Universal/Pixelogic timer typography much more faithfully, without manually stacking digit objects or recreating the commercial fonts.
The current pre-rendered timer feature could remain unchanged, with an additional option such as "Import Custom PNG Font Strip".
Would it be possible to implement this in the BDS Java timer engine in a future update?
I think this would be a very useful feature for projects that require accurate reproduction of commercial Blu-ray playback timelines.
Best regards!
-
Alexey Kolesnikov
- Posts: 728
- Joined: Fri Mar 01, 2013 1:03 pm
Font Strip on BDS
HI Ricardo,
After pre-rendered timer created a sub-menu, right click on the menu in the Project Tree -> Batch operations -> Replace text with rendered images.
Then again Batch operations -> Optimize images.
Now there should be only 10 PNGs that are used in this menu and you can replace them with your images.
After pre-rendered timer created a sub-menu, right click on the menu in the Project Tree -> Batch operations -> Replace text with rendered images.
Then again Batch operations -> Optimize images.
Now there should be only 10 PNGs that are used in this menu and you can replace them with your images.
Best regards,
Alexey Kolesnikov
Alexey Kolesnikov
-
rickemail2
- Posts: 86
- Joined: Fri Jun 25, 2021 9:45 pm
Font Strip on BDS
Hi Alexey,Alexey Kolesnikov wrote: Tue Nov 17, 2026 5:41 pm HI Ricardo,
After pre-rendered timer created a sub-menu, right click on the menu in the Project Tree -> Batch operations -> Replace text with rendered images.
Then again Batch operations -> Optimize images.
Now there should be only 10 PNGs that are used in this menu and you can replace them with your images.
Thank you for the instructions! They were very helpful.
I also noticed a graphical bug when using `updateTimer()` for chapter numbers in sliding thumbnail menus. The thumbnails display visual glitches during horizontal navigation. This did not happen when I used `setText()`.
I prefer `updateTimer()` because the pre-rendered numbers look much better.
I'll attach a short video showing the issue so you can see exactly what happens.
Best regards,
Ricardo
https://gofile.io/d/15klYTsS
-
Alexey Kolesnikov
- Posts: 728
- Joined: Fri Mar 01, 2013 1:03 pm
Font Strip on BDS
Hi Ricardo,
updateTimer should not touch anything except the timer objects. Send me please a full project (.BDMD + PNGs, without video/audio/subtitle assets).
updateTimer should not touch anything except the timer objects. Send me please a full project (.BDMD + PNGs, without video/audio/subtitle assets).
Best regards,
Alexey Kolesnikov
Alexey Kolesnikov
-
rickemail2
- Posts: 86
- Joined: Fri Jun 25, 2021 9:45 pm
Font Strip on BDS
https://gofile.io/d/RD9LwkI5Alexey Kolesnikov wrote: Thu Nov 19, 2026 2:48 pm Hi Ricardo,
updateTimer should not touch anything except the timer objects. Send me please a full project (.BDMD + PNGs, without video/audio/subtitle assets).
-
rickemail2
- Posts: 86
- Joined: Fri Jun 25, 2021 9:45 pm
Font Strip on BDS
Hi Alexey!Alexey Kolesnikov wrote: Thu Nov 19, 2026 2:48 pm Hi Ricardo,
updateTimer should not touch anything except the timer objects. Send me please a full project (.BDMD + PNGs, without video/audio/subtitle assets).
Would it be possible to extend the BDS **Pre-rendered Timer** feature to support dynamic text?
Currently, it only supports digits and colons. It would be great to support letters, numbers, symbols (such as `/`) and accented characters using pre-rendered PNG glyphs.
Ideally, a function similar to `updateTimer()` could update this text dynamically, preserving image quality without relying on `setText()`.
This would be especially useful for chapter indicators like `1/23`, `2/23`, etc., and other dynamic BD-J menu elements.
Thanks!
-
Alexey Kolesnikov
- Posts: 728
- Joined: Fri Mar 01, 2013 1:03 pm
Font Strip on BDS
I need a real-life example of where this gives benefits. I don’t see any pros - only cons. Instead of 1 object with text you are getting 10 objects - that leads to the performance issues.
PS: I got your point about chapter numbers. If this is the only one - I will think about this particular scenario.
PS: I got your point about chapter numbers. If this is the only one - I will think about this particular scenario.
Best regards,
Alexey Kolesnikov
Alexey Kolesnikov
-
rickemail2
- Posts: 86
- Joined: Fri Jun 25, 2021 9:45 pm
Font Strip on BDS
Hi Alexey,Alexey Kolesnikov wrote: Sun Nov 22, 2026 3:06 pm I need a real-life example of where this gives benefits. I don’t see any pros - only cons. Instead of 1 object with text you are getting 10 objects - that leads to the performance issues.
PS: I got your point about chapter numbers. If this is the only one - I will think about this particular scenario.
Yes, that's exactly what I meant! My main goal is to use pre-rendered characters for the chapter numbers displayed on the playback timeline, similar to the existing Pre-rendered Timer feature in BDS.
For example, I would like to display chapter information such as 1/23, 12/23, or other numeric formats using pre-rendered digits, including separators such as "/" and "-".
The main benefit is visual quality and consistency with professionally authored Blu-ray menus, where these elements use pre-rendered graphics instead of standard Java-rendered text.
I understand your concern about performance and the number of objects. I'm not asking for a complete font atlas system if that would be too complex. An extension of the existing Pre-rendered Timer mechanism to support chapter numbers and these additional characters would already be very useful.
Thank you for considering this particular scenario!
Best regards.