UHD 4K encoding to .265 with x265.exe / FFMPEG

Blu-ray and UHD Authoring
Post Reply
Markus1970
Posts: 43
Joined: Tue May 04, 2021 9:51 pm

UHD 4K encoding to .265 with x265.exe / FFMPEG

Post by Markus1970 »

I have noticed that there is not much reference to how to use x265.exe or FFMPEG to get the .265 video stream that DVDLogic requires as the video input as you cant just simply use a mp4 or m4v as it gets rejected.

For example i have a 4k 3840x2160 at 50Fps encoded to x264 AVC and for the life of me I'm struggling using x265.exe or FFMPEG as I just get a file of below 100Mb from a input mp4 which is 22gb I have used x264.exe with no problems.

Can you share some light on the best way to get a uhd compliant bluray video file.

The below resolutions are only supported with HEVC .

3840×2160 60p 16:9
3840×2160 59.94p 16:9
3840×2160 50p 16:9
3840×2160 25p 16:9
3840×2160 24p 16:9
3840×2160 23.976p 16:9

Alexey Kolesnikov
Posts: 401
Joined: Fri Mar 01, 2013 1:03 pm
Contact:

Re: UHD 4K encoding to .265 with x265.exe / FFMPEG

Post by Alexey Kolesnikov »

Hi Markus,

There is https://blu-disc.net/features#video_codec a small example.
Best regards,
Alexey Kolesnikov

Markus1970
Posts: 43
Joined: Tue May 04, 2021 9:51 pm

Re: UHD 4K encoding to .265 with x265.exe / FFMPEG

Post by Markus1970 »

Hi Thanks i did use that code but FFMPEG freeze's while it is working and I notice that about 100gb gets used up too quickly from my hardrive i guess a temp file i presume, its not till i close the cmd screen that the 100gb comes back.

So not sure if its ffmpeg or the x265.exe that is causing it, I am using the latest available.

mj0012
Posts: 3
Joined: Mon Dec 06, 2021 10:23 pm

Re: UHD 4K encoding to .265 with x265.exe / FFMPEG

Post by mj0012 »

I've had good luck using "libx265" in FFMpeg rather than the separate x265.exe, make sure you have a recent FFMpeg version and try these command lines:

For SDR

ffmpeg -y -i "Source SDR.mov" -pix_fmt yuv420p10le -vcodec libx265 -preset slow -x265-params "pass=1:keyint=24:min-keyint=1:bitrate=XXXXX:vbv-bufsize=99000:vbv-maxrate=99000:level-idc=51:no-open-gop=1:uhd-bd=1:range=limited:chromaloc=2:colorprim=bt709:transfer=bt709:colormatrix=bt709" -sn "Output SDR Pass 1.265"

ffmpeg -y -i "Source SDR.mov" -pix_fmt yuv420p10le -vcodec libx265 -preset slow -x265-params "pass=2:keyint=24:min-keyint=1:bitrate=XXXXX:vbv-bufsize=99000:vbv-maxrate=99000:level-idc=51:no-open-gop=1:uhd-bd=1:range=limited:chromaloc=2:colorprim=bt709:transfer=bt709:colormatrix=bt709" -sn "Output SDR Pass 2.265"

For HDR

ffmpeg -y -i "Source HDR.mov" -pix_fmt yuv420p10le -vcodec libx265 -preset slow -x265-params "pass=1:keyint=24:min-keyint=1:bitrate=XXXXX:vbv-bufsize=99000:vbv-maxrate=99000:level-idc=51:no-open-gop=1:uhd-bd=1:range=limited:chromaloc=2:colorprim=bt2020:transfer=smpte2084:colormatrix=bt2020nc:master-display='G(13250,34500)B(7500,3000)R(34000,16000)WP(15635,16450)L(10000000,1)'" -sn "Output HDR Pass 1.265"

ffmpeg -y -i "Source HDR.mov" -pix_fmt yuv420p10le -vcodec libx265 -preset slow -x265-params "pass=2:keyint=24:min-keyint=1:bitrate=XXXXX:vbv-bufsize=99000:vbv-maxrate=99000:level-idc=51:no-open-gop=1:uhd-bd=1:range=limited:chromaloc=2:colorprim=bt2020:transfer=smpte2084:colormatrix=bt2020nc:master-display='G(13250,34500)B(7500,3000)R(34000,16000)WP(15635,16450)L(10000000,1)'" -sn "Output HDR Pass 2.265"


Make sure to replace "XXXXX" with the bitrate that you want to use, and keep it the same for both passes. Also if you're encoding a 50 fps video make sure to use "keyint=50" instead of "keyint=24"

Hope this helps!

Markus1970
Posts: 43
Joined: Tue May 04, 2021 9:51 pm

Re: UHD 4K encoding to .265 with x265.exe / FFMPEG

Post by Markus1970 »

Thanks mj0012

I havnt tried the code yet but I thought I'd try and compile ffmpeg my self, does libx265 come packaged in the normal ffmpeg download or do you have to get a purpose built package.

I have a ryzen 9 cpu and one of the latest nvidia graphic cards for encoding needs.

I think you can use -hwaccel to let ffmpeg deligate coding duties.

mj0012
Posts: 3
Joined: Mon Dec 06, 2021 10:23 pm

Re: UHD 4K encoding to .265 with x265.exe / FFMPEG

Post by mj0012 »

I haven't tried compiling it myself, but this page should give you some more information on how to do that:

https://trac.ffmpeg.org/wiki/Encode/H.265

Markus1970
Posts: 43
Joined: Tue May 04, 2021 9:51 pm

Re: UHD 4K encoding to .265 with x265.exe / FFMPEG

Post by Markus1970 »

I looked into using my Nvida RTX3070 to do the work as its much quicker than using the cpu as in libx265.

Ive tried the below sample not sure if its completely UHD compliant at all.

Code: Select all

ffmpeg.exe -hwaccel_output_format cuda  -i input.mp4 -profile:v main10  -pix_fmt p010le -c:v hevc_nvenc -preset slow -b:v 20M -bufsize 25M  -an -color_primaries 1 -color_trc 1 -colorspace 1   output.265
This is the mediainfo from the input.mp4.

Code: Select all


Video
ID                                       : 1
Format                                   : HEVC
Format/Info                              : High Efficiency Video Coding
Format profile                           : Main@L5.1@High
Codec ID                                 : hvc1
Codec ID/Info                            : High Efficiency Video Coding
Duration                                 : 58 min 57 s
Bit rate                                 : 59.6 Mb/s
Width                                    : 3 840 pixels
Height                                   : 2 160 pixels
Display aspect ratio                     : 16:9
Frame rate mode                          : Constant
Frame rate                               : 50.000 FPS
Color space                              : YUV
Chroma subsampling                       : 4:2:0
Bit depth                                : 8 bits
Bits/(Pixel*Frame)                       : 0.144
Stream size                              : 24.5 GiB (100%)
Language                                 : English
Color range                              : Limited
Color primaries                          : BT.709
Transfer characteristics                 : BT.709
Matrix coefficients                      : BT.709
Codec configuration box                  : hvcC


And from a sample output.265 file

Code: Select all


Video
Format                                   : HEVC
Format/Info                              : High Efficiency Video Coding
Format profile                           : Main 10@L5.1@High
Width                                    : 3 840 pixels
Height                                   : 2 160 pixels
Display aspect ratio                     : 16:9
Frame rate                               : 50.000 FPS
Color space                              : YUV
Chroma subsampling                       : 4:2:0
Bit depth                                : 10 bits
Color range                              : Limited
Color primaries                          : BT.709
Transfer characteristics                 : BT.709
Matrix coefficients                      : BT.709


Markus1970
Posts: 43
Joined: Tue May 04, 2021 9:51 pm

Re: UHD 4K encoding to .265 with x265.exe / FFMPEG

Post by Markus1970 »

I've noticed I get this output on my mp4 or mov files before encoding and after using the encoder hwaccel nvdec for my ffmpeg encoding.

Code: Select all

ffmpeg.exe -hwaccel_output_format cuda  -i input.mp4 -profile:v main10  -pix_fmt p010le -c:v hevc_nvenc -preset slow - g 50 -b:v 20M -bufsize 25M  -an -color_primaries 1 -color_trc 1 -colorspace 1   output.265

Code: Select all

<Width>1920</Width>
<Height>1080</Height>
<Stored_Height>1088</Stored_Height>
<Sampled_Width>1920</Sampled_Width>
<Sampled_Height>1080</Sampled_Height>

BDS UHD reports the following error
UHD bd constraint : file: menu.265: width and height combination incorrect. Value: 1920 x 1088

I get the same error with 4k encoded files with height of 2176.

Code: Select all

"Width": "3840",
"Height": "2160",
"Stored_Height": "2176",
"Sampled_Width": "3840",
"Sampled_Height": "2160",
I'd prefer to use hardware encoding as instead of taking 8 hours to encode a 1 hour video it will only take about 2.

It does seem like BDS UHD is picking up the resolution from the stored height value of 1088, this seems the only error its giving me so far.

So is there a way to correct this with a switch that is supported with hardware encoding and if I ignored the error message would I find that 4k players won't handle the video stream correctly.

Markus1970
Posts: 43
Joined: Tue May 04, 2021 9:51 pm

Re: UHD 4K encoding to .265 with x265.exe / FFMPEG

Post by Markus1970 »

So after some Internet searching I found this thread here which explains it.


https://github.com/rigaya/NVEnc/issues/303

HEVC encoders will code by 32x32 block, so when you encode fullHD(1920x1080) video, it is internally padded to meet the block size and coded as 1920x1088. The decoder or the player should crop the last 8 pixels after decoding if the resolution is 1920x1080, and I think there are nothing we can do when encoding.
Unfortunately not all players can play the files like the xbox

MJS63
Posts: 27
Joined: Mon Oct 18, 2021 2:52 pm

Re: UHD 4K encoding to .265 with x265.exe / FFMPEG

Post by MJS63 »

mj0012 wrote:
Mon Dec 06, 2021 10:32 pm
I've had good luck using "libx265" in FFMpeg rather than the separate x265.exe, make sure you have a recent FFMpeg version and try these command lines:
Thank you for those command lines, running them as we speak. Do you know if there is any real world difference in the resulting encode using the "libx265" and FFMpeg vs using the x265.exe?

Thanks in advance.

Post Reply