DVDLogic Software forum

Unique technologies
https://forum.dvd-logic.com/

MUI Generator not found at error

https://forum.dvd-logic.com/viewtopic.php?f=2&t=135

Page 1 of 2

MUI Generator not found at error

Posted: Sat May 15, 2021 9:38 am
by Markus1970
I've got the trial version of mx Pro and I have the HardwareID.
Txt in the bds Pro folder after it was generated by HID. exe

I've restarted the application but I get an error when I go to create scenes for the movie.

MUI Generator not found at
Check program options (tools options)

Do I need tsmuxer as I thought the internal muxer was all I need.

Thanks

Re: MUI Generator not found at error

Posted: Sat May 15, 2021 9:51 am
by Alexey Kolesnikov
MUI Generator not found means that you are using the target "Scenarist". Please change the target using the drop-down menu at the 4th button from the left on the toolbar.

Re: MUI Generator not found at error

Posted: Sat May 15, 2021 10:28 am
by Markus1970
OK I think I found the problem you have to go to properties of the movie than click on the arrow to the right of scenes to open the internal muxer to generate scenes first as I was right clicking the movie and selecting open scenes.

Now the only problem I have now is that my video file is 1h 55min long so the time code should be 00:00:00:00 to 01:55:23:99 but the muxer says its 00:00:06:22 so some think is not right here.

I used these X264 settings


x264 --bitrate XXXXX --preset veryslow --tune film --bluray-compat --vbv-maxrate 40000 --vbv-bufsize 30000 --level 4.1 --keyint 30 --open-gop --slices 4 --fake-interlaced --colorprim "bt709" --transfer "bt709" --colormatrix "bt709" --sar 1:1 --pass 1 -o out.264 input.file

Re: MUI Generator not found at error

Posted: Sat May 15, 2021 11:05 am
by Alexey Kolesnikov
Try to delete an index file via "Project properties" -> "Delete all index files" at the bottom. Then try to open it again. If the problem still exists - I need this video file to find the cause.

Re: MUI Generator not found at error

Posted: Sat May 15, 2021 12:52 pm
by Markus1970
Very weird problem here with timing or fps.

The original mp4with 30fps
Video
ID : 1
Format : AVC
Format/Info : Advanced Video Codec
Format profile : High@L4.1
Format settings : CABAC / 3 Ref Frames
Format settings, CABAC : Yes
Format settings, Reference frames : 3 frames
Format settings, GOP : M=1, N=30
Muxing mode : Container profile=High@5.1
Codec ID : avc1
Codec ID/Info : Advanced Video Coding
Duration : 1 h 55 min
Bit rate : 20.0 Mb/s
Width : 1 920 pixels
Height : 1 080 pixels
Display aspect ratio : 16:9
Frame rate mode : Constant
Frame rate : 30.000 FPS
Color space : YUV
Chroma subsampling : 4:2:0
Bit depth : 8 bits
Scan type : Progressive
Bits/(Pixel*Frame) : 0.321
Stream size : 16.1 GiB (99%)
Language : English
Color range : Limited
Color primaries : BT.709
Transfer characteristics : BT.709
Matrix coefficients : BT.709
Codec configuration box : avcC
after using the x264 profile below

1080p29.97

x264 --bitrate XXXXX --preset veryslow --tune film --bluray-compat --vbv-maxrate 40000 --vbv-bufsize 30000 --level 4.1 --keyint 30 --open-gop --slices 4 --fake-interlaced --colorprim "bt709" --transfer "bt709" --colormatrix "bt709" --sar 1:1 --pass 1 -o out.264 input.file

I get this
Video
Format : AVC
Format/Info : Advanced Video Codec
Format profile : Main@L4.1
Format settings : CABAC / 3 Ref Frames
Format settings, CABAC : Yes
Format settings, Reference frames : 3 frames
Bit rate mode : Variable
Bit rate : 20.0 Mb/s
Maximum bit rate : 40.0 Mb/s
Width : 1 920 pixels
Height : 1 080 pixels
Display aspect ratio : 16:9
Frame rate mode : Variable
Color space : YUV
Chroma subsampling : 4:2:0
Bit depth : 8 bits
Scan type : Progressive
Writing library : x264 core 161 r3053 c347e7a
Encoding settings : cabac=1 / ref=1 / deblock=1:-1:-1 / analyse=0x1:0 / me=dia / subme=2 / psy=1 / psy_rd=1.00:0.15 / mixed_ref=0 / me_range=16 / chroma_me=1 / trellis=0 / 8x8dct=0 / cqm=0 / deadzone=21,11 / fast_pskip=1 / chroma_qp_offset=0 / threads=24 / lookahead_threads=8 / sliced_threads=0 / slices=4 / nr=0 / decimate=1 / interlaced=fake / bluray_compat=1 / constrained_intra=0 / bframes=3 / b_pyramid=1 / b_adapt=2 / b_bias=0 / direct=3 / weightb=1 / open_gop=1 / weightp=1 / keyint=30 / keyint_min=1 / scenecut=40 / intra_refresh=0 / rc_lookahead=30 / rc=abr / mbtree=1 / bitrate=20000 / ratetol=1.0 / qcomp=0.60 / qpmin=0 / qpmax=69 / qpstep=4 / vbv_maxrate=40000 / vbv_bufsize=30000 / nal_hrd=vbr / filler=0 / ip_ratio=1.40 / aq=1:1.00
Color range : Limited
Color primaries : BT.709
Transfer characteristics : BT.709
Matrix coefficients : BT.709
and in the BDS scenes generator its only 11 mins long not 1h59min and shows 23.976 at the top.

Re: MUI Generator not found at error

Posted: Sat May 15, 2021 2:47 pm
by Alexey Kolesnikov
25 and 29.97 should be interlaced

Re: MUI Generator not found at error

Posted: Sat May 15, 2021 3:20 pm
by Markus1970
The confusing thing is that http://www.x264bluray.com/home/1080i-p says progressive and fake-interlaced is supported.

Re: MUI Generator not found at error

Posted: Sat May 15, 2021 5:09 pm
by Alexey Kolesnikov
I don't know what is it fake-interlaced. It looks like a hack. There is a list of supported resolutions and frame rates https://en.wikipedia.org/wiki/Blu-ray#Video

Re: MUI Generator not found at error

Posted: Sat May 15, 2021 5:33 pm
by Markus1970
I see so I only have the option of the below.
1920×1080 29.97i 16:9
1920×1080 25i 16:9
1920×1080 24p 16:9
1920×1080 23.976p 16:9
Does this apply to videos in the menus too.

Thanks for your support

Re: MUI Generator not found at error

Posted: Sat May 15, 2021 6:09 pm
by Markus1970
Ok so encoded the video to 29.97i with the following.
x264 --bitrate XXXXX --preset veryslow --tune film --bluray-compat --vbv-maxrate 40000 --vbv-bufsize 30000 --level 4.1 --keyint 30 --open-gop --slices 4 --tff --colorprim "bt709" --transfer "bt709" --colormatrix "bt709" --sar 1:1 --pass 1 -o out.264 input.file
But still in the scenes generator it shows 1920x1080, 23.976

I've noticed in mediainfo it says Frame rate mode : Variable is it this that's causing me this headache, it should say 29.97 surly.
I thought the above x264 code was compatable.

What do you use to demux please.
Format : AVC
Format/Info : Advanced Video Codec
Format profile : Main@L4.1
Format settings : CABAC / 3 Ref Frames
Format settings, CABAC : Yes
Format settings, Reference frames : 3 frames
Bit rate mode : Variable
Bit rate : 23.0 Mb/s
Maximum bit rate : 40.0 Mb/s
Width : 1 920 pixels
Height : 1 080 pixels
Display aspect ratio : 16:9
Frame rate mode : Variable
Color space : YUV
Chroma subsampling : 4:2:0
Bit depth : 8 bits
Scan type : MBAFF
Scan type, store method : Interleaved fields
Scan order : Top Field First
Writing library : x264 core 161 r3053 c347e7a
Encoding settings : cabac=1 / ref=1 / deblock=1:-1:-1 / analyse=0x1:0 / me=dia / subme=2 / psy=1 / psy_rd=1.00:0.15 / mixed_ref=0 / me_range=16 / chroma_me=1 / trellis=0 / 8x8dct=0 / cqm=0 / deadzone=21,11 / fast_pskip=1 / chroma_qp_offset=0 / threads=24 / lookahead_threads=8 / sliced_threads=0 / slices=4 / nr=0 / decimate=1 / interlaced=tff / bluray_compat=1 / constrained_intra=0 / bframes=3 / b_pyramid=1 / b_adapt=2 / b_bias=0 / direct=3 / weightb=1 / open_gop=1 / weightp=0 / keyint=30 / keyint_min=1 / scenecut=40 / intra_refresh=0 / rc_lookahead=30 / rc=abr / mbtree=1 / bitrate=23000 / ratetol=1.0 / qcomp=0.60 / qpmin=0 / qpmax=69 / qpstep=4 / vbv_maxrate=40000 / vbv_bufsize=30000 / nal_hrd=vbr / filler=0 / ip_ratio=1.40 / aq=1:1.00
Color range : Limited
Color primaries : BT.709
Transfer characteristics : BT.709
Matrix coefficients : BT.709
All times are UTC
Page 1 of 2

Powered by phpBB® Forum Software © phpBB Limited